Links | Search




Sections: Audio COM/ActiveX Control Panel Databases Debug Device Information .NET CF Email, POOM Emulator Enterprise eVB eVC++ Events Files and Registry GAPI Hardware Buttons HTML in Programs Images Installation IrDA, LED Misc Network, Internet Non-Programming Password Protection PIE Pocket PC 2002 Power Printing SIP Synchronization Today Tools User Interface XML

QA: Why cannot I connect to Pocket PC 2002 Emulator?

By Vassili Philippov, June 25, 2002.
Print version

Question

Why I cannot connect to the Pocket PC emulator when I am offline? It shows "Timeout: Failed to connect to the device" error message. Old Pocket PC 2000 Emulator works without any problems. How can I solve this problem with Pocket PC 2002 Emulator?

Answer

Pocket PC 2002 Emulator uses TCP/IP and cannot work without at least one open TCP/IP connection. You can setup Microsoft Loopback Adaptor and the emulator will use this connection. Here are step-by-step instructions how to setup Microsoft Loopback Adaptor under Windows 2000 and Windows XP.

Windows 2000

1. Open Control Panel -> Add/Remove Hardware applet.

2. Add new device.

3. Choose to select new hardware from a list.

4. Add new network adapter.

5. Choose Microsoft Loopback Adapter.

6. After adding Microsoft Loopback Adapter open "Network and Dial-up Connections" applet in the Control Panel...

7. and edit properties of the new connection.

8. Set "192.168.0.1" is IP address and "255.255.255.0" as subnet mask.

The connection is setup. Now you can use Pocket PC 2002 emulator without being connected to Internet.

Windows XP

1. Open Control Panel -> Printers and Other Hardware applet.

2. Click on the "Add Hardware" link in the top right corner.

3. Choose "Yes, I have connected the hardware".

4. Add a new hardware device.

5. Choose to select the hardware from a list.

6. Add new network adapter.

7. Choose Microsoft Loopback Adapter.

8. After adding Microsoft Loopback Adapter open "Network Connections" applet in the Control Panel and edit properties of the new connection. If the new connection is not shown repeat steps 1..7 again (it really helps).

9. Edit TCP/IP properties.

8. Set "192.168.0.1" is IP address and "255.255.255.0" as subnet mask.

The connection is setup. Now you can use Pocket PC 2002 emulator without being connected to Internet.

Related resources:

Discuss

Discuss this article. Here you can write your comments and read comments of other developers.